To Cease the Presses!

I simply obtained an electronic mail from a mechanical downside with a Thumper Massager

My lords requested me if I might discover any attainable locations to place the poorly working Thumper unit again into the working state . At that second, for this individual (for an area restore store) however for these percussion massagers, I got here to many opinions that phone helpdesk (actual individual) has been helped and spoken by way of frequent repairs to Thumper therapeutic massage items.

I'm unsure these patches are simple for each massaging mannequin, however the commonest repair to the Thumper (MP2) appears to be the change, and it appears fairly simple to repair. Listed here are directions for correcting malfunction g Change

Activating Thumper Mini Professional – Issues:

  1. Change is stopped and not clicks in settings cannot be activate or off.
  2. There’s a lengthy delay earlier than the massager begins to vibrate. Is that this downside corrective?

Each conditions happen when the interior connection of the change or change housing is flawed or interrupted. The identical mannequin exists as Thumper, MP2 and the identical downside.

Correction of downside:

First, you wish to test if the change is free to maneuver.

If the change is jammed or jammed (not blinking), you need to clear the switches and the housing (slide the plastic half into the change) after which change the change

Don’t go away to scare the phrase "cost" (that is only a cool phrase for "restoration"), that is a simple activity and you’ll not want any particular instruments; only a tiny flat head screwdriver and possibly a Phillips head screwdriver have to be a trick; oh, sure, and some metal wool.

First:

First, unlock the unit and the panel behind the change must be cleaned and the connection re-pulled if they’re disconnected (and that is normally the case), the connection factors have to be cleaned.

After switching on, take a cotton swab that’s rubbed with alcohol 91% and clear (don’t forget to have multiple contact to control the pace).

If the straightforward alcohol knot doesn’t do the trick, tiny items properly and tightly rotated) and connect it to the switches on high of the change (when the change is open fr (19459004)

take a small flat screwdriver and transfer the metal wool up and down the change till you see the contacts are clear. ]

] This is essential:

If it’s essential to activate the Thumper Mini Professional once more, you must ensure it’s re-assembled and examined , it has to perform like the brand new all three speeds.

Take pleasure in it

If in case you have any issues or nonetheless don’t work, please contact with Thumper Inc. 1-800-848-6737.

Returning to Acquired Electronic mail

Sadly, the change was no downside with Mr. C's unit, the issue was a bit extra intrusive than a unclean connection, however the elements he wanted made it out there, simply didn’t care about fixing the machines and didn’t fear in regards to the extra delivery prices

He informed me that he had two Mini Profi and, as you may think about, are transported to Canada and are pricey once more.

Need to know if anybody right here in the USA works for them?

Acquired just a few circuit boards and numerous elements from the seller he had been by way of however didn’t wish to seize (if averted).

I informed him that he didn’t have any deep mechanical issues with one in every of my trumpets, only a minor switching downside, however I seek advice from my website for a assessment the place a man is way past the cellphone.

I perceive you do not need the unit your self, but it surely's good to know that in case you are so inclined, these are machines that the proprietor (slightly than disposable) can enhance with the proper steering. not a lot assist, however I needed her the most effective.

I didn’t know the best way to assist Mr. C along with his downside, there are extra issues with both of them (I'm trimming tree as I write this).

I don’t like spending cash unnecessarily and delivery prices to Canada and returning one thing that weighs ¬£ 7 might be not low-cost, so I'm very pleased that Thumper is keen to spare elements and directions for the machine to go once more, I actually miss the Thumper once you went for 3 weeks. It looks like Mr C., why would there be one if they didn’t precisely what they stated and did nicely.

Supply by Dave Dillard

Leave a Reply